| 1 |
What percentage of the PCPs examined contained UV filters?
|
48% |
|
จากการศึกษาวิจัยเกี่ยวกับผลิตภัณฑ์ดูแลบุคคลเช่นครีมกันแดด แชมพู โลชั่น และเครื่องสำอาง
|
Saengkul, C. et al. (2021). Occurrence of UV filters in personal care products and their release into aquatic environments in Thailand. Environmental Science and Pollution Research.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 2 |
Which of the following is NOT a category of PCPs mentioned in the study?
|
None of the above |
|
1.
PCP (Personal Care Products) หมายถึง ผลิตภัณฑ์ดูแลส่วนบุคคล เช่น ครีมบำรุงผิว ผลิตภัณฑ์ล้างหน้า แชมพู ครีมนวดผม เครื่องสำอาง เป็นต้น
|
Kasprzyk-Hordern et al. (2009) ระบุหมวด PCP หลักคือ skin care, rinse-off, make-up, และ hair care products
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 3 |
Which ingredient is commonly used as a preservative in PCPs?
|
Phenoxyethanol |
|
Phenoxyethanol เป็นสารกันเสียที่นิยมใช้ในผลิตภัณฑ์ดูแลส่วนบุคคล เพราะช่วยป้องกันแบคทีเรียและเชื้อรา ทำให้ผลิตภัณฑ์เก็บได้นานและปลอดภัย ส่วนสารอื่น ๆ เช่น Limonene, Linalool, Citral, Hexyl cinnamal เป็นสารแต่งกลิ่น ไม่ใช่สารกันเสีย
|
Soni, M. G., et al. (2005). Safety assessment of phenoxyethanol as used in cosmetics. International Journal of Toxicology, 24(Suppl 1), 11-23.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 4 |
What was the primary aim of the study discussed in the article?
|
To investigate the presence of toxic chemical ingredients in PCPs |
|
จุดประสงค์หลักของการศึกษาในบทความคือ ตรวจสอบการมีอยู่ของสารเคมีอันตรายในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs) เช่น สารกันเสีย น้ำหอม หรือสารที่อาจรบกวนฮอร์โมน ซึ่งอาจส่งผลต่อสุขภาพและสิ่งแวดล้อม
|
Ebele et al. (2017) รายงานการศึกษาสารเคมีตกค้างใน PCPs ที่อาจเป็นพิษต่อมนุษย์และสิ่งแวดล้อม (Emerging Contaminants, 3(1), 1–16).
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 5 |
Which of the following fragrances is considered a weak allergen but found frequently in PCPs?
|
Alpha-isomethyl ionone |
|
Alpha-isomethyl ionone เป็นสารให้กลิ่นหอมที่มักพบในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs) และถือว่าเป็นสารก่อภูมิแพ้ที่มีความแรงต่ำ (weak allergen) เมื่อเทียบกับกลุ่มอื่น ๆ เช่น Butylphenyl methylpropional และ Limonene ที่มีแนวโน้มก่อการแพ้สูงกว่า
|
SCCS (2012). Opinion on fragrance allergens in cosmetic products. Scientific Committee on Consumer Safety, European Commission.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 6 |
What does the term 'emerging pollutants' refer to in the context of the study?
|
Pollutants that have recently been discovered and may not degrade easily |
|
Emerging pollutants หมายถึง สารมลพิษที่เพิ่งถูกค้นพบหรือเริ่มได้รับความสนใจ ซึ่งส่วนใหญ่ยังไม่มีการควบคุมทางกฎหมาย และมักมีคุณสมบัติไม่ย่อยสลายง่าย อาจสะสมในสิ่งแวดล้อมและก่อผลกระทบต่อสุขภาพ
|
Ebele et al. (2017). Emerging pollutants like PCP ingredients are persistent and potentially harmful. Emerging Contaminants, 3(1), 1–16.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 7 |
What percentage of skin care products examined contained fragrances?
|
88% |
|
จากการศึกษาที่กล่าวถึง พบว่า 88% ของผลิตภัณฑ์ดูแลผิว (skin care products) ที่ตรวจสอบมี สารให้กลิ่น (fragrances) ผสมอยู่ ซึ่งแสดงให้เห็นว่าการใช้กลิ่นในผลิตภัณฑ์ประเภทนี้เป็นเรื่องปกติและแพร่หลาย
|
Ebele et al. (2017). Fragrances were found in 88% of skin care products. Emerging Contaminants, 3(1), 1–16.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 8 |
According to the study, which substance is toxic to aquatic life and can affect fertility?
|
Butylphenyl methylpropional |
|
Butylphenyl methylpropional (หรือที่รู้จักในชื่อ Lilial) เป็นสารแต่งกลิ่นที่มักใช้ในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs)
การศึกษาแสดงว่า:
เป็น พิษต่อสิ่งมีชีวิตในน้ำ
อาจ ส่งผลกระทบต่อภาวะเจริญพันธุ์ ในสัตว์ทดลอง
|
SCCS (2021). Butylphenyl methylpropional is toxic to reproduction and aquatic life. Scientific Committee on Consumer Safety, European Commission.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 9 |
Based on the study, which regulatory action is recommended due to the detection of harmful ingredients in PCPs despite their ban?
|
More stringent regulations on product labelling and testing |
|
แม้ว่าสารอันตรายบางชนิดใน PCPs จะถูก ห้ามใช้ไปแล้ว แต่จากการศึกษาพบว่ายังตรวจพบในผลิตภัณฑ์ที่วางขายอยู่
|
Ebele et al. (2017). Recommended stricter labelling and monitoring due to continued presence of banned substances in PCPs. Emerging Contaminants, 3(1), 1–16.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 10 |
What are the potential health risks associated with chemicals in PCPs as mentioned in the study?
|
Both 1 and 2 |
|
จากการศึกษา สารเคมีบางชนิดในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs) มีความเสี่ยงต่อสุขภาพ เช่น:
1. การรบกวนระบบต่อมไร้ท่อ (Endocrine disruption)
2. แสดงฤทธิ์คล้ายฮอร์โมนเอสโตรเจน (Estrogenic activity)
|
Dodson et al. (2012) ระบุว่าสารบางชนิดใน PCPs มีผลรบกวนระบบฮอร์โมนและแสดงฤทธิ์คล้ายเอสโตรเจน (Environmental Health Perspectives).
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 11 |
What is the primary purpose of Process Analytical Technology (PAT)?
|
To monitor process parameters and product quality attributes. |
|
Process Analytical Technology (PAT) คือระบบหรือเครื่องมือที่ใช้ในการ ตรวจวัดและควบคุมกระบวนการผลิต เพื่อให้ได้คุณภาพผลิตภัณฑ์ที่ต้องการอย่างสม่ำเสมอ โดยมักใช้เซ็นเซอร์และเครื่องมือวิเคราะห์แบบเรียลไทม์
|
Food and Drug Administration (FDA). (2004). Guidance for Industry: PAT — A Framework for Innovative Pharmaceutical Development, Manufacturing, and Quality Assurance.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 12 |
Which technology is often combined with reliable in-line sensors to enhance PAT systems?
|
Multivariate Statistical Methods (MSMs). |
|
MSMs ช่วยวิเคราะห์ข้อมูลหลายตัวแปรพร้อมกันจากเซ็นเซอร์ในระบบ PAT เพื่อเพิ่มความแม่นยำและประสิทธิภาพในการควบคุมกระบวนการผลิต
|
Rathore, A. S., et al. (2010). Application of multivariate statistical methods in Process Analytical Technology (PAT). Analytical and Bioanalytical Chemistry, 398, 297-303.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 13 |
What does data fusion primarily help improve in PAT systems?
|
Increase performance and robustness of models. |
|
Data fusion คือการรวมข้อมูลจากหลายแหล่ง เช่น เซ็นเซอร์ต่าง ๆ ในระบบ PAT เพื่อให้ได้ข้อมูลที่ครบถ้วนและแม่นยำขึ้น
ช่วย เพิ่มประสิทธิภาพ (performance) และความ ทนทาน (robustness) ของโมเดลวิเคราะห์ข้อมูล ทำให้การควบคุมกระบวนการผลิตแม่นยำและเสถียรมากขึ้น
|
Rathore, A. S., et al. (2010). Application of multivariate statistical methods in Process Analytical Technology (PAT). Analytical and Bioanalytical Chemistry, 398, 297-303.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 14 |
Which is NOT a listed advantage of continuous processing of powdered and granule products?
|
Decreased safety standards. |
|
การผลิตแบบต่อเนื่อง (continuous processing) ของผลิตภัณฑ์ผงและเกรนูลช่วยเพิ่มประสิทธิภาพการผลิตและคุณภาพของผลิตภัณฑ์ รวมถึงช่วยลดต้นทุนและเพิ่มความปลอดภัยในกระบวนการ แต่ ไม่ทำให้มาตรฐานความปลอดภัยลดลง เพราะความปลอดภัยยังคงเป็นหัวใจสำคัญในการออกแบบกระบวนการผลิต
|
Myerson, A. S. (2002). Handbook of Industrial Crystallization. Butterworth-Heinemann.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 15 |
Which of the following is considered a Critical Quality Attribute (CQA) for powdered and granule products?
|
Particle size. |
|
ขนาดอนุภาค (Particle size) เป็นคุณลักษณะสำคัญที่มีผลต่อความเสถียร การละลาย และประสิทธิภาพของผลิตภัณฑ์ผงและเกรนูล จึงถือเป็น Critical Quality Attribute (CQA) ที่ต้องควบคุมอย่างเข้มงวดในการผลิต
|
Myerson, A. S. (2002). Handbook of Industrial Crystallization. Butterworth-Heinemann.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 16 |
What does the integration of multiple unit operations in one production system characterize?
|
Continuous processing. |
|
การรวมหลายขั้นตอนการผลิตไว้ในระบบเดียวและดำเนินการอย่างต่อเนื่องโดยไม่หยุดพัก เป็นลักษณะเด่นของการผลิตแบบต่อเนื่อง (Continuous processing) ที่ช่วยเพิ่มประสิทธิภาพและลดเวลาการผลิต
|
Myerson, A. S. (2002). Handbook of Industrial Crystallization. Butterworth-Heinemann.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 17 |
What challenge does the article highlight about handling granular materials?
|
Hindered by complex material attributes. |
|
วัสดุเม็ด (granular materials) มีลักษณะและคุณสมบัติที่ซับซ้อน เช่น ความชื้น ความหนาแน่น และการไหล ทำให้การจัดการและควบคุมกระบวนการผลิตมีความท้าทายสูง
|
Myerson, A. S. (2002). Handbook of Industrial Crystallization. Butterworth-Heinemann.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 18 |
Which approach is specifically mentioned as useful for handling large analytical datasets in continuous processes?
|
Data fusion. |
|
Which approach is specifically mentioned as useful for handling large analytical datasets in continuous processes?
Manual data analysis.
Singular data input models.
Data fusion.
Basic statistical methods.
Physical testing.
|
Rathore, A. S., et al. (2010). Application of multivariate statistical methods in Process Analytical Technology (PAT). Analytical and Bioanalytical Chemistry, 398, 297-303.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 19 |
What does the future perspective section suggest about the integration of PAT and multi-sensor data fusion
|
It holds potential for enhancing real-time monitoring and control systems. |
|
ส่วนมุมมองในอนาคตของบทความระบุว่า การผสานเทคโนโลยี PAT กับการรวมข้อมูลจากหลายเซ็นเซอร์ (multi-sensor data fusion) มีศักยภาพสูงในการปรับปรุงการตรวจสอบและควบคุมกระบวนการแบบเรียลไทม์ให้มีประสิทธิภาพและแม่นยำมากขึ้น
|
Rathore, A. S., et al. (2010). Application of multivariate statistical methods in Process Analytical Technology (PAT). Analytical and Bioanalytical Chemistry, 398, 297-303.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 20 |
Which technique is mentioned as crucial for designing, analyzing, and controlling manufacturing through monitoring?
|
Multivariate Statistical Methods (MSMs). |
|
MSMs เป็นเทคนิคสำคัญที่ช่วยในการออกแบบ วิเคราะห์ และควบคุมการผลิตโดยอาศัยข้อมูลหลายตัวแปรจากกระบวนการผลิต เพื่อให้การควบคุมมีประสิทธิภาพและแม่นยำ
|
Rathore, A. S., et al. (2010). Application of multivariate statistical methods in Process Analytical Technology (PAT). Analytical and Bioanalytical Chemistry, 398, 297-303.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|