| 1 |
What percentage of the PCPs examined contained UV filters?
|
48% |
|
ร้อยละ 48 | ร้อยละ 48 ของผลิตภัณฑ์ดูแลส่วนบุคคลที่ตรวจสอบ มีสารกรองรังสี UV เช่น oxybenzone หรือ octinoxate
|
งานวิจัยของ Braunschweig & Rand, 2011
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 2 |
Which of the following is NOT a category of PCPs mentioned in the study?
|
None of the above |
|
ทุกข้อที่ให้มาถูกกล่าวถึงทั้งหมด
|
งานวิจัยของ Braunschweig & Rand, 2011
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 3 |
Which ingredient is commonly used as a preservative in PCPs?
|
Phenoxyethanol |
|
Phenoxyethanol เป็น สารกันเสีย (preservative) ที่ใช้กันแพร่หลายในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs) เพื่อยับยั้งการเติบโตของแบคทีเรียและยืดอายุการเก็บรักษา
|
Limonene, Linalool, Citral, และ Hexyl Cinnamal เป็น fragrance ingredients (สารแต่งกลิ่น) ที่มักใช้เพิ่มกลิ่นหอมในผลิตภัณฑ์ แต่ Phenoxyethanol เป็น สารกันเสีย (preservative) ที่ใช้กันแพร่หลายในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs) เพื่อยับยั้งการเติบโตของแบคทีเรียและยืดอายุการเก็บรักษา
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 4 |
What was the primary aim of the study discussed in the article?
|
To investigate the presence of toxic chemical ingredients in PCPs |
|
วัตถุประสงค์หลักของงานวิจัยนี้คือ เพื่อศึกษาการปนเปื้อนของสารเคมีที่อาจเป็นพิษในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs) เช่น สารกรองรังสี UV, สารกันเสีย, สารแต่งกลิ่น ที่อาจตกค้างในสิ่งแวดล้อมและส่งผลกระทบต่อระบบนิเวศและสุขภาพมนุษย์
|
งานของ Brausch & Rand, 2011
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 5 |
Which of the following fragrances is considered a weak allergen but found frequently in PCPs?
|
All of the above |
|
Alpha-Isomethyl Ionone — เป็น fragrance ingredient ที่ใช้กันแพร่หลาย พบได้บ่อยในน้ำหอมและผลิตภัณฑ์ดูแลส่วนบุคคล โดยทั่วไปถือว่าเป็น สารก่อภูมิแพ้อ่อน (weak allergen)
Butylphenyl Methylpropional — เป็นสารแต่งกลิ่นที่ให้กลิ่นหอมแบบดอกไม้เช่นกัน เป็นที่รู้จักว่ามีศักยภาพก่อภูมิแพ้ แต่ไม่แรงมากเมื่อเทียบกับสารก่อภูมิแพ้รุนแรงอื่น ๆ
Limonene — เป็นน้ำมันหอมระเหยที่พบได้มากในเปลือกส้ม มะนาว ฯลฯ มักใช้แต่งกลิ่น ผลิตภัณฑ์หลายอย่างมี Limonene เยอะมาก และจัดว่าเป็น weak to moderate allergen แต่มีแนวโน้มจะออกฤทธิ์แรงขึ้นเมื่อ oxidized (เมื่อสัมผัสอากาศ)
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 6 |
What does the term 'emerging pollutants' refer to in the context of the study?
|
Pollutants that have recently been discovered and may not degrade easily |
|
Emerging pollutants หมายถึง สารมลพิษชนิดใหม่ หรือ สารที่เพิ่งถูกค้นพบว่ามีอยู่ในสิ่งแวดล้อม และอาจไม่สามารถย่อยสลายได้ง่ายในธรรมชาติ รวมถึงอาจมีผลกระทบต่อสิ่งแวดล้อมหรือสุขภาพของสิ่งมีชีวิต แม้จะยังไม่ได้มีกฎหมายควบคุมเข้มงวดเท่าสารมลพิษรุ่นเก่า เช่น โลหะหนักหรือสารเคมีอุตสาหกรรมดั้งเดิม
|
งานวิจัยเกี่ยวกับ PCPs (Personal Care Products) หรือการปนเปื้อนของสารเคมีในสิ่งแวดล้อม
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 7 |
What percentage of skin care products examined contained fragrances?
|
88% |
|
ประมาณ 88% ของผลิตภัณฑ์ดูแลผิวที่ตรวจสอบ มีสารแต่งกลิ่น
|
Brausch & Rand, 2011
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 8 |
According to the study, which substance is toxic to aquatic life and can affect fertility?
|
Butylphenyl methylpropional |
|
Butylphenyl Methylpropional (Lilial) มีข้อมูลและงานวิจัยว่ามี พิษต่อสิ่งมีชีวิตน้ำ (aquatic toxicity) และมีข้อมูลว่าเป็น สารรบกวนต่อระบบสืบพันธุ์ (may affect fertility)
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 9 |
Based on the study, which regulatory action is recommended due to the detection of harmful ingredients in PCPs despite their ban?
|
More stringent regulations on product labelling and testing |
|
ควรมีการกำกับดูแลที่เข้มงวดขึ้น โดยเฉพาะด้านการติดฉลากและการทดสอบคุณภาพสารเคมีในผลิตภัณฑ์ เพื่อป้องกันไม่ให้สารอันตรายหลุดรอดออกสู่ตลาดหรือสิ่งแวดล้อม
|
Brausch & Rand, 2011
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 10 |
What are the potential health risks associated with chemicals in PCPs as mentioned in the study?
|
Both 1 and 2 |
|
การรบกวนต่อระบบต่อมไร้ท่อ (Endocrine Disruption) ตัวอย่างเช่น สารกรองรังสี UV บางตัว เช่น Oxybenzone, Octinoxate ถูกจัดว่าเป็น สารรบกวนฮอร์โมน (Endocrine Disruptors)
พฤติกรรมการเลียนแบบฮอร์โมนเอสโตรเจน (Estrogenic Activity) ซึ่งหมายถึง สารเหล่านี้สามารถทำงานคล้ายฮอร์โมนเอสโตรเจนของร่างกาย อาจมีผลต่อระบบสืบพันธุ์ การพัฒนาของสิ่งมีชีวิต และอาจเกี่ยวข้องกับโรคบางชนิด
|
Brausch & Rand, 2011
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 11 |
What is the primary purpose of Process Analytical Technology (PAT)?
|
To monitor process parameters and product quality attributes. |
|
จุดประสงค์หลักของ PAT คือ: เพื่อตรวจสอบและควบคุมพารามิเตอร์ของกระบวนการผลิต (Process Parameters) และคุณลักษณะคุณภาพของผลิตภัณฑ์ (Product Quality Attributes) แบบเรียลไทม์ เพื่อให้มั่นใจว่าผลิตภัณฑ์ได้มาตรฐาน ลดความเสี่ยง ลดของเสีย และเพิ่มประสิทธิภาพ
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 12 |
Which technology is often combined with reliable in-line sensors to enhance PAT systems?
|
Multivariate Statistical Methods (MSMs). |
|
MSMs เช่น PCA (Principal Component Analysis), PLS (Partial Least Squares) และ Machine Learning Models จะช่วยตีความข้อมูลจากเซนเซอร์แบบเรียลไทม์ และคาดการณ์คุณภาพผลิตภัณฑ์ได้แม่นยำกว่า
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 13 |
What does data fusion primarily help improve in PAT systems?
|
Increase performance and robustness of models. |
|
Data fusion ทำให้ โมเดลวิเคราะห์ (Models) มีความแม่นยำ (Performance) และเสถียร (Robustness) มากขึ้น ลดความไม่แน่นอนและ Noise ของข้อมูล สามารถคาดการณ์คุณภาพผลิตภัณฑ์ได้ดีขึ้นภายใต้สภาพการผลิตจริง
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 14 |
Which is NOT a listed advantage of continuous processing of powdered and granule products?
|
Increased financial services. |
|
ข้อดีของการผลิตแบบต่อเนื่อง (เมื่อเทียบกับการผลิตแบบแบทช์) คือ
Improved Productivity — เพิ่มประสิทธิภาพการผลิต ผลิตได้ปริมาณมากขึ้นต่อหน่วยเวลา
Enhanced Product Quality — ควบคุมคุณภาพได้สม่ำเสมอ ลดความแปรปรวนของคุณภาพ
ช่วยเรื่องการใช้ทรัพยากรให้คุ้มค่า ลดของเสีย
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 15 |
Which of the following is considered a Critical Quality Attribute (CQA) for powdered and granule products?
|
Particle size. |
|
โดยทั่วไป CQA ที่สำคัญสำหรับผงและเม็ด คือ Particle Size (ขนาดอนุภาค) เพราะมีผลต่อการละลาย การกระจายตัว ความเสถียร และการดูดซึมของยา/สาร
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 16 |
What does the integration of multiple unit operations in one production system characterize?
|
Continuous processing. |
|
การผลิตแบบต่อเนื่อง จะมีการเชื่อมต่อหน่วยการผลิตหลาย ๆ ขั้นตอนเข้าด้วยกัน เพื่อให้วัตถุดิบไหลผ่านกระบวนการอย่างต่อเนื่องและไม่มีการหยุดพักระหว่างขั้นตอนต่าง ๆ
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 17 |
What challenge does the article highlight about handling granular materials?
|
Hindered by complex material attributes. |
|
โดยทั่วไป วัสดุเม็ดมักมีลักษณะเฉพาะที่ซับซ้อน เช่น รูปร่างเม็ดที่ไม่สม่ำเสมอ การไหลที่ไม่สม่ำเสมอ (flowability) การจับตัวกันเป็นก้อน (caking) การเปลี่ยนแปลงคุณสมบัติเมื่อสภาพแวดล้อมเปลี่ยน (ความชื้น ฯลฯ) ดังนั้น ความท้าทายหลักที่บทความเน้นคือ Hindered By Complex Material Attributes — ถูกจำกัดหรือยากลำบากเนื่องจากคุณสมบัติของวัสดุที่ซับซ้อน
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 18 |
Which approach is specifically mentioned as useful for handling large analytical datasets in continuous processes?
|
Data fusion. |
|
เพราะในกระบวนการผลิตแบบต่อเนื่องจะมีข้อมูลจำนวนมากจากหลายแหล่ง (เช่น เซนเซอร์ต่าง ๆ) การใช้ Data Fusion จะช่วยรวมข้อมูลเหล่านี้เข้าด้วยกันเพื่อวิเคราะห์อย่างมีประสิทธิภาพและแม่นยำ
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 19 |
What does the future perspective section suggest about the integration of PAT and multi-sensor data fusion
|
It holds potential for enhancing real-time monitoring and control systems. |
|
แนวทางนี้มีศักยภาพสูงมาก (holds potential) สำหรับการยกระดับ การเฝ้าติดตาม (monitoring) และ การควบคุมกระบวนการ (control systems) แบบเรียลไทม์
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 20 |
Which technique is mentioned as crucial for designing, analyzing, and controlling manufacturing through monitoring?
|
Multivariate Statistical Methods (MSMs). |
|
MSMs ช่วยให้สามารถวิเคราะห์ความสัมพันธ์ซับซ้อนระหว่างตัวแปรได้ MSMs ช่วยตรวจจับความผิดปกติและควบคุมคุณภาพได้แม่นยำกว่า Univariate Analysis (ที่วิเคราะห์ทีละตัวแปร) MSMs เป็นแกนสำคัญของ Real-Time Monitoring และ Process Control สมัยใหม่
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|