| 1 |
What percentage of the PCPs examined contained UV filters?
|
38% |
|
เปอร์เซ็นต์ของผลิตภัณฑ์ดูแลส่วนบุคคล( PCPs ) โดยปกติแล้วจะมีสารกรองรังสีอยู่ระหว่าง 20-50% ดังนั้นสาเหตุที่ผมตอบ 38% เพราะว่ามันเป็นค่ากลางที่ดูสมเหตุสมผล
|
จากบทความ Tsui, Mirabelle MP, et al. "Occurrence, distribution and ecological risk assessment of multiple classes of UV filters in surface waters from different countries." Water research 67 (2014): 55-65.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 2 |
Which of the following is NOT a category of PCPs mentioned in the study?
|
Rinse-off products |
|
เนื่องจาก Rinse-off products เป็นผลิตภันที่ต้องล้างออกหลังใช้ เช่น สบู่หรือแชมพู ดังนั้น Rinse-off products มันไม่ควรมีสารกรองรังสีอยู่ เพราะอาจเกิดการตกค้างและมันไม่ได้นำไปใช้ประโยชน์
|
Fewings, J., and T. Menné. "An update of the risk assessment for methylchloroisothiazolinone/methylisothiazolinone (MCI/MI) with focus on rinse‐off products." Contact Dermatitis 41.1 (1999): 1-13.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 3 |
Which ingredient is commonly used as a preservative in PCPs?
|
Phenoxyethanol |
|
Phenoxyethanol เป็นสารที่ใช้กันอย่างแพร่หลายเพื่อ ยับยั้งการเจริญเติบโตของจุลินทรีย์ (เชื้อรา แบคทีเรีย และยีสต์) ในผลิตภัณฑ์ดูแลผิว เช่น โลชั่น ครีม เป็นต้น ส่วนสารตัวที่เหลือ Limonene, Linalool, Citral Hexyl และ cinnamal เป็นสารกลิ่นหอมไม่ใช่สารกันเสีย
|
อ้างอิงจาก European Commission Cosmetic Regulation (EC) No 1223/2009
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 4 |
What was the primary aim of the study discussed in the article?
|
To investigate the presence of toxic chemical ingredients in PCPs |
|
วัตถุประสงค์หลักของงานวิจัยเกี่ยวกับ PCPs มักเน้นที่การตรวจสอบสารเคมี โดยเฉพาะสารที่อาจเป็นอันตรายหรือมีผลกระทบต่อสุขภาพและสิ่งแวดล้อม เช่น สารกันเสีย สารกรองรังสี สารก่อภูมิแพ้ หรือสารพิษบางชนิด การศึกษาเหล่านี้ช่วยให้เข้าใจถึงระดับการปนเปื้อนและความเสี่ยงจากการใช้ผลิตภัณฑ์เหล่านี้
|
European Commission Regulation (EC) No 1223/2009
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 5 |
Which of the following fragrances is considered a weak allergen but found frequently in PCPs?
|
Limonene |
|
Limonene เป็นส่วนประกอบหลักในน้ำมันหอมระเหยจากพืช เช่น ลาเวนเดอร์และเปลือกส้ม ผู้ผลิต PCPs จึงนิยมใช้สารกลิ่นเหล่านี้เพราะให้กลิ่นหอมสดชื่น เป็นธรรมชาติ และมีต้นทุนต่ำ โดย Limonene มีความเป็นสารก่อภูมิแพ้ต่ำหรือเรียกว่า (weak allergen)
|
Cheng J, Zug KA. Fragrance allergic contact dermatitis. Dermatitis. 2014 Sep-Oct;25(5):232-45. doi: 10.1097/DER.0000000000000067. PMID: 25207685.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 6 |
What does the term 'emerging pollutants' refer to in the context of the study?
|
Pollutants that have recently been discovered and may not degrade easily |
|
Emerging pollutants คือ สารเคมีหรือสิ่งปนเปื้อนที่เพิ่งถูกระบุว่าเป็นปัญหาต่อสิ่งแวดล้อมและสุขภาพมนุษย์ สารเหล่านี้มักเป็นสารที่ใช้ในชีวิตประจำวัน เช่น ยารักษาโรค, สารเคมีในผลิตภัณฑ์ดูแลส่วนบุคคล (PCPs), สารก่อกวนระบบฮอร์โมน และสารสังเคราะห์ใหม่ ๆ
|
Richardson, S. D., & Ternes, T. A. (2018). "Water analysis: Emerging contaminants and current issues." Analytical Chemistry, 90(1), 398-428.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 7 |
What percentage of skin care products examined contained fragrances?
|
70% |
|
โดยส่วนใหญ่ประมาณ 60-80% ของผลิตภัณฑ์ดูแลผิวมีการเติมสารแต่งกลิ่นและสาเหตุที่เลือก 70% เพราะว่า เป็นตัวเลขกลางที่เหมาะสม
|
Srinivasulu, M., et al. "Personal care products—fragrances, cosmetics, and sunscreens—in the environment." Environmental micropollutants. Elsevier, 2022. 131-149.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 8 |
According to the study, which substance is toxic to aquatic life and can affect fertility?
|
Butylphenyl methylpropional |
|
Butylphenyl methylpropional เป็นสารแต่งกลิ่นให้กลิ่นแบบดอกไม้ เป็นพิษต่อระบบสืบพันธุ์, เป็นพิษต่อสิ่งมีชีวิตในน้ำและเป็นสารก่อภูมิแพ้ผิวหนัง
|
European Chemicals Agency (ECHA) และ EU Regulation (2021/1902)
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 9 |
Based on the study, which regulatory action is recommended due to the detection of harmful ingredients in PCPs despite their ban?
|
More stringent regulations on product labelling and testing |
|
เนื่องจาก PCPs บางประเภทยังมีประโยชน์อยู่ เช่น ครีมกันแดด PCPs เหล่านี้ยังมีประโยชน์ ดังนั้นเราควรศึกษา และเพิ่มความเข้มข้นของการผลิต PCPs ให้นำสิ่งที่เป็นอันตรายออกไป เหลือแต่สิ่งที่มีประโยน์
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 10 |
What are the potential health risks associated with chemicals in PCPs as mentioned in the study?
|
Both 1 and 2 |
|
สารบางชนิดใน PCPs เช่น parabens, phthalates, และ UV filters สามารถแทรกแซงการทำงานของ ระบบต่อมไร้ท่อ และสารบางตัวใน PCPs เช่น butylparaben, ethylparaben, และ benzophenone-1แสดงฤทธิ์คล้าย เอสโตรเจน เมื่อเข้าสู่ร่างกาย อาจนำไปสู่ปัญหา เช่น ความไม่สมดุลของฮอร์โมนเพศ
|
Witorsch RJ, Thomas JA. Personal care products and endocrine disruption: A critical review of the literature. Crit Rev Toxicol. 2010 Nov;40 Suppl 3:1-30. doi: 10.3109/10408444.2010.515563. PMID: 20932229.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 11 |
What is the primary purpose of Process Analytical Technology (PAT)?
|
To monitor process parameters and product quality attributes. |
|
PAT คือแนวคิดและเครื่องมือที่ใช้ในการตรวจสอบ ควบคุม และเพิ่มประสิทธิภาพของกระบวนการผลิตแบบตลอดเวลา โดยเน้นการ วัดค่าพารามิเตอร์สำคัญของกระบวนการ และ ลักษณะสำคัญของผลิตภัณฑ์ เช่น ความชื้น ความหนาแน่น ความบริสุทธิ์
|
Prawanne, Charuwan. "The Process of Transformation into a Smart City: A Case Study of Khon Kaen Municipality." Local Administration Journal 13.3 (2020): 267-284.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 12 |
Which technology is often combined with reliable in-line sensors to enhance PAT systems?
|
Multivariate Statistical Methods (MSMs). |
|
Multivariate Statistical Methods (MSMs). คือการใช้สถิติในการวิเคราะห์ข้อมูลหลายตัวแปรพร้อมกัน เพื่อตรวจสอบความสัมพันธ์ระหว่าง หลายพารามิเตอร์ของกระบวนการแยกแยะสัญญานรบกวน ออกจากข้อมูลสำคัญ ทำนายคุณภาพของผลิตภัณฑ์และส่งเสริมระบบ PAT ให้มีความแม่นยำและอัตโนมัติมากขึ้น MSM ช่วย วิเคราะห์ข้อมูลที่ซับซ้อนจากเซนเซอร์หลายตัวพร้อมกัน ทำให้ควบคุมคุณภาพได้ดีกว่า Single Variable Basic quality control Manual monitoring and Non-scientific.
|
Liland, Kristian Hovde. "Multivariate methods in metabolomics–from pre-processing to dimension reduction and statistical analysis." TrAC Trends in Analytical Chemistry 30.6 (2011): 827-841.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 13 |
What does data fusion primarily help improve in PAT systems?
|
Increase performance and robustness of models. |
|
Data Fusion คือกระบวนการรวบรวมและผสานข้อมูลจากหลายแหล่งข้อมูลหรือเซนเซอร์หลายตัวเข้าด้วยกัน เพื่อสร้างข้อมูลชุดใหม่ที่มีคุณภาพสูงกว่าเดิม ดังนั้นData Fusion ช่วยให้ข้อมูลที่ PAT ใช้วัดและวิเคราะห์มี ความแม่นยำและครอบคลุมมากขึ้น
|
Bakeev, K. A. (2010). Process Analytical Technology: Spectroscopic Tools and Implementation Strategies
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 14 |
Which is NOT a listed advantage of continuous processing of powdered and granule products?
|
Decreased safety standards. |
|
Continuous processing ช่วยการเพิ่มประสิทธิภาพการผลิต คุณภาพผลิตภัณฑ์ดีขึ้น และช่วยลดต้นทุนเนื่องจากมันคือการผลิตแบบต่อเนื่องจึงสามารถลดต้นทุนได้ ไม่มีอะไรเกี่ยวข้องกับความปลอดภัยเลย
|
Plumb, Keith. "Continuous processing in the pharmaceutical industry: changing the mind set." Chemical Engineering Research and Design 83.6 (2005): 730-738.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 15 |
Which of the following is considered a Critical Quality Attribute (CQA) for powdered and granule products?
|
Particle size. |
|
Critical Quality Attribute (CQA) คือ คุณลักษณะเฉพาะของผลิตภัณฑ์ ที่ต้องควบคุม เพื่อให้มั่นใจว่าผลิตภัณฑ์นั้นมี คุณภาพ ความปลอดภัย และประสิทธิภาพ ตามที่กำหนดไว้ ในกระบวนการผลิต Particle size (ขนาดอนุภาค) เป็น CQA สำคัญเพราะมีผลต่อการไหลของผง, การละลายของสารออกฤทธิ์, ความสม่ำเสมอของปริมาณยาและประสิทธิภาพของการอัดเม็ดหรือบรรจุแคปซูล
|
Holm, Per, et al. "Q8 (R2) Pharmaceutical Development." ICH quality guidelines: an implementation guide (2017): 535-577.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 16 |
What does the integration of multiple unit operations in one production system characterize?
|
Continuous processing. |
|
เพราะ Continuous processing. คือการที่นำขั้นตอนต่างๆมาทำรวมกันอย่างต่อเนื่องเพื่อการประหยัดเวลา
|
Bakeev, Katherine A., ed. Process analytical technology: spectroscopic tools and implementation strategies for the chemical and pharmaceutical industries. John Wiley & Sons, 2010.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 17 |
What challenge does the article highlight about handling granular materials?
|
Hindered by complex material attributes. |
|
Granular materials วัสดุที่ประกอบด้วยอนุภาคเล็กๆ จำนวนมาก ซึ่งอยู่รวมกันแต่ ไม่ยึดติดเป็นเนื้อเดียวกันแต่ละอนุภาคยังคงคุณสมบัติเฉพาะของตัวเอง เช่น ขนาด รูปร่าง น้ำหนัก และการไหล ซึ่ง คำถามก่อนหน้านี้การใช้ PAT และ Data Fusion เพื่อช่วยจัดการกับ ความไม่แน่นอนของวัสดุเกรนูล เหล่านี้
|
Bakeev, Katherine A., ed. Process analytical technology: spectroscopic tools and implementation strategies for the chemical and pharmaceutical industries. John Wiley & Sons, 2010.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 18 |
Which approach is specifically mentioned as useful for handling large analytical datasets in continuous processes?
|
Data fusion. |
|
Data fusion. มีประโยชน์ในการจัดการกับข้อมูลวิเคราะห์จำนวนมาก โดยเฉพาะในระบบการผลิตแบบ Continuous Processes ที่มีการรวบรวมข้อมูลจาก รวมข้อมูลหลายมิติให้เป็นภาพรวมเดียวที่สมบูรณ์ ช่วยลดความซ้ำซ้อนของข้อมูล
|
Bakeev, Katherine A., ed. Process analytical technology: spectroscopic tools and implementation strategies for the chemical and pharmaceutical industries. John Wiley & Sons, 2010.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 19 |
What does the future perspective section suggest about the integration of PAT and multi-sensor data fusion
|
It holds potential for enhancing real-time monitoring and control systems. |
|
เพราะการรวมเทคนิคเหล่านี้ไว้ด้วยกัน ช่วยจัดการกับข้อมูลจำนวนมากจากเซนเซอร์หลายจุด ลดความผิดพลาดของระบบแบบเดิม จาก data fusion ที่ทำหน้าที่รวบรวมข้อมูลส่งให้ PAT ทำการวิเคราห์ข้อมูล ทำให้ได้ผลที่แม่นยำ
|
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 20 |
Which technique is mentioned as crucial for designing, analyzing, and controlling manufacturing through monitoring?
|
Multivariate Statistical Methods (MSMs). |
|
MSMs เพราะสามารถจัดการกับข้อมูลหลายตัวแปรพร้อมกัน ช่วยให้ตัดสินใจและควบคุมได้แม่นยำและมีประสิทธิภาพสูง
สาเหตุที่ไม่เลือกข้ออื่น Univariate analysis วิเคราะห์ได้ทีละตัวแปรเท่านั้น ไม่เหมาะกับระบบซับซ้อน, Non-statistical observational techniques, ไม่มีหลักสถิติรองรับ ใช้ไม่ได้ในระบบควบคุมจริง, Hypothetical modeling เป็นแบบจำลองเชิงสมมติ ใช้ในขั้นวิจัย ไม่เหมาะกับการควบคุมจริง และ Experimental simulations ใช้ทดสอบ ไม่ใช่สำหรับการควบคุมจริงระหว่างผลิต
|
Bakeev, Katherine A., ed. Process analytical technology: spectroscopic tools and implementation strategies for the chemical and pharmaceutical industries. John Wiley & Sons, 2010.
|
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|