ตรวจข้อสอบ > คณิศร วีณะคุปต์ > เคมีเชิงวิทยาศาสตร์การแพทย์ | Chemistry in Medical Science > Part 1 > ตรวจ

ใช้เวลาสอบ 24 นาที

Back

# คำถาม คำตอบ ถูก / ผิด สาเหตุ/ขยายความ ทฤษฎีหลักคิด/อ้างอิงในการตอบ คะแนนเต็ม ให้คะแนน
1


What percentage of the PCPs examined contained UV filters?

58%

The answer being 58% suggests that, in the study or data being referred to, 58% of the Primary Care Physicians (PCPs) examined were found to have contained UV filters. The reason this is the correct answer likely comes from a survey or study where a sample of PCPs was tested for UV filter usage or inclusion, and 58% of them showed that they utilized or prescribed UV filters in their practice.

percentage of Primary Care Physicians (PCPs) were examined in relation to the use of UV filters (such as in their recommendations or prescriptions for sun protection). However, I don't have access to your specific reference or study.

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

2


Which of the following is NOT a category of PCPs mentioned in the study?

Hair care products

Hair care products refer to items like shampoos, conditioners, hair treatments, and other products for hair care. These are not related to a professional category of physicians but are consumer products used for personal grooming.

In healthcare research, categorizing Primary Care Physicians typically follows a classification system based on their specialization, training, and role in the healthcare system. A widely used framework to categorize PCPs is the American Medical Association (AMA) and other medical professional organizations like the American Academy of Family Physicians (AAFP). These organizations define different categories of PCPs based on their medical focus and the patient populations they serve.

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

3


Which ingredient is commonly used as a preservative in PCPs?

Phenoxyethanol

Phenoxyethanol has a relatively low toxicity profile compared to some other preservatives. It is considered safe for use in concentrations up to 1% in personal care products, which is the typical amount found in most products. The Cosmetic Ingredient Review (CIR) Expert Panel has deemed it safe at these concentrations.

A theoretical framework about the commonly used ingredient as a preservative in Personal Care Products (PCPs) can be built around the idea of product stability, microbiological safety, and consumer health. This framework will explore various preservatives, their roles in maintaining the safety, efficacy, and shelf-life of PCPs. One of the most widely used preservatives in the cosmetic and personal care industry is Phenoxyethanol.

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

4


What was the primary aim of the study discussed in the article?

To investigate the presence of toxic chemical ingredients in PCPs

The primary aim of a study discussing the presence of toxic chemical ingredients in Personal Care Products (PCPs) would be to identify, analyze, and assess the potential risks posed by harmful chemicals used in these products. The reason for this focus is typically to raise awareness and promote the safety and health of consumers. In the context of this type of research, the study would likely aim to explore how prevalent certain toxic substances are in the personal care industry, identify potential health hazards, and investigate the effects these chemicals may have on human health, especially with prolonged or repeated use.

dsas asd

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

5


Which of the following fragrances is considered a weak allergen but found frequently in PCPs?

sdasde a

sada

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

6


What does the term 'emerging pollutants' refer to in the context of the study?

None of the above

da gsdrrf we dfsdds

sdaw dfa

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

7


What percentage of skin care products examined contained fragrances?

69.5%

sd awd sa

sd awf gsdg

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

8


According to the study, which substance is toxic to aquatic life and can affect fertility?

Alpha-isomethyl ionone

a wfdsg gds d

asawww

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

9


Based on the study, which regulatory action is recommended due to the detection of harmful ingredients in PCPs despite their ban?

Decrease in product manufacturing

sda wdsa

dfh uku9p;

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

10


What are the potential health risks associated with chemicals in PCPs as mentioned in the study?

Only cosmetic issues

o-[o-o88iue

asfd gsrfgdfhdf hdf

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

11


What is the primary purpose of Process Analytical Technology (PAT)?

To monitor process parameters and product quality attributes.

fads afdfsaf

fasfa fah rth

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

12


Which technology is often combined with reliable in-line sensors to enhance PAT systems?

Multivariate Statistical Methods (MSMs).

sdrf wegdfs gfs

dfasf jrthj gdj

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

13


What does data fusion primarily help improve in PAT systems?

Increase performance and robustness of models.

saf we fgdse fdsef

fgdsg fgsdgsgsgsgddsafa

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

14


Which is NOT a listed advantage of continuous processing of powdered and granule products?

Decreased safety standards.

asf dfafda fa

asfasfase dsfe

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

15


Which of the following is considered a Critical Quality Attribute (CQA) for powdered and granule products?

Particle size.

asdf sef dsef ds

fdse fdsef

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

16


What does the integration of multiple unit operations in one production system characterize?

Continuous processing.

sadawd saw dsa

daw dsaw

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

17


What challenge does the article highlight about handling granular materials?

Hindered by complex material attributes.

dasdawds

adwadsawd

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

18


Which approach is specifically mentioned as useful for handling large analytical datasets in continuous processes?

Data fusion.

wdawdawda

dawdawdawdawdd

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

19


What does the future perspective section suggest about the integration of PAT and multi-sensor data fusion

It is too complex to implement effectively.

adsf adsf asf

hgd fhdhdfg dfg

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

20


Which technique is mentioned as crucial for designing, analyzing, and controlling manufacturing through monitoring?

Multivariate Statistical Methods (MSMs).

asd awd sa wd

asd awd sawd sa

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

ผลคะแนน 50.35 เต็ม 140

แท๊ก หลักคิด
แท๊ก อธิบาย
แท๊ก ภาษา